The Influence of Sample Volume Applied to the Makler Sperm Counting Chamber Upon the Measured Concentration of Latex Beads: A Multi-Centre Study

Objective: To undertake a multi-centre study to maximize the number of Makler chambers used. Methods: A total of 15 laboratories participated with 31 Makler chambers. A suspension of latex beads was prepared to a concentration of 20 millions per milliliter, and 0.5 mL aliquots distributed to each participating laboratory. They measured the concentration on their Makler chamber(s) used for routine semen analysis by adding 3, 4, 5, 7 and 10 μL volumes of bead suspension to the chamber. Results: There was no difference in within-chamber analysis of the bead concentration according to the volume of bead suspension applied within the range of 3–10 μL (F4,14=2.634, P=0.056). However, the between-chamber effects were significantly different (F30,124=4.937, P=0.000), and 24/31 (77.5%) chambers tested had an average bias\u3e10% compared to the target bead concentration. Conclusions: A volume of 3–10 μL added to Makler counting chambers does not influence the concentration measured of latex beads, but the between-chamber variability and positive bias seen would suggest that other sources of error are present which are yet to be identified

Geostationary Coastal and Air Pollution Events (GeoCAPE) Filter Radiometer (FR)

The GeoCAPE Filter Radiometer (FR) Study is a different instrument type than all of the previous IDL GeoCape studies. The customer primary goals are to keep mass, volume and cost to a minimum while meeting the science objectives and maximizing flight opportunities by fitting on the largest number of GEO accommodations possible. Minimize total mission costs by riding on a commercial GEO satellite. For this instrument type, the coverage rate, km 2 min, was significantly increased while reducing the nadir ground sample size to 250m. This was accomplished by analyzing a large 2d area for each integration period. The field of view will be imaged on a 4k x 4k detector array of 15 micrometer pixels. Each ground pixel is spread over 2 x 2 detector pixels so the instantaneous field of view (IFOV) is 2048 X 2048 ground pixels. The baseline is, for each field of view 50 sequential snapshot images are taken, each with a different filter, before indexing the scan mirror to the next IFOV. A delta would be to add additional filters